OMG Roofing Products Demonstrates Induction Welding System

OMG Roofing Products demonstrated its new RhinoBond Foil Tool, an induction welding system for securing single-ply commercial roofing membranes, at the BAU show in Munich.

OMG’s RhinoBond Foil Tool is specifically designed for use over foil face PIR insulation. The welding tool includes plate sensor technology to help users locate RhinoBond Plates installed under the roofing membrane, and assists with tool alignment for optimum bonding. A tone and a visual indicator light lets operators know when the weld cycle is complete.

The RhinoBond System is induction based technology used for installing commercial roofing systems. To date, more than 170 million m2 of commercial roofing membranes have been installed around the globe with RhinoBond, including more than 125 projects in Europe accounting for more than 3,200,000 m2.

The company was also looking for new distribution partners in targeted geographies throughout Europe during the show.

“As more roofing contractors have seen the labor savings and roof performance benefits that the RhinoBond System can offer, we have had tremendous growth,” says Lennard Spirig, Europe market manager. ”With updated technology and expanded distribution, we expect acceptance of the RhinoBond System across the region.”

RhinoBond is a method for installing thermoplastic and soon will be available for certain clean EPDM membrane. The system consists of a stand-up induction welding tool and magnetic cooling clamps. Contractors install roofing insulation using fasteners and specially coated plates designed specifically for the type of membrane being installed – PVC, TPO or Clean EPDM. Each plate is then bonded to the roof membrane installed over the top with the RhinoBond plate welding tool. The result is a roofing system that can provide enhanced wind performance with fewer fasteners, fewer membrane seams and zero penetrations of the new membrane.

Currently the RhinoBond System conforms with CE requirements and is approved for use in Europe by many roof system providers, including Bauder, Carlisle/Hertalan, Danosa, Fatra, FDT, Firestone, GAF, IcoPal, IKO, Renolit, Sika, Siplast, and Soprema/Flag.

Headquartered in Agawam, Mass., OMG Roofing Products is a supplier of commercial roofing products including specialty fasteners, insulation adhesives, roof drains, pipe supports, roof repair tape as well as productivity tools such as RhinoBond. The company’s focus is delivering products and services that improve contractor productivity and enhance roof system performance. For additional information, please contact OMG Roofing Products at (413)789-0252 or visit the website.

Ease Single-ply Membrane Welding

Miller Weldmaster has introduced Seamrover DD, a dual-direction roof welder to increase operational ease of single-ply membrane welding.

Miller Weldmaster has introduced Seamrover DD, a dual-direction roof welder to increase operational ease of single-ply membrane welding.

Miller Weldmaster has introduced Seamrover DD, a dual-direction roof welder to increase operational ease of single-ply membrane welding. An automatic floating nozzle ensures the Seamrover DD applies uniform welds, and a flexible core weld roller allows the Seamrover DD to accommodate any roof surface. The tool can be used in a forward or backward direction for long, straight consistent seams; reduced welding time; and increased seam visibility.

SFS intec Receives FM Approvals Certificate for Induction Welding System

SFS intec received an FM Approvals Class 4470 Certificate of Compliance from FM Approvals for isoweld.

SFS intec received an FM Approvals Class 4470 Certificate of Compliance from FM Approvals for its induction welding system, isoweld.

SFS intec, Wyomissing, Pa., has recently received an FM Approvals Class 4470 Certificate of Compliance from FM Approvals, part of FM Global, for isoweld. isoweld is SFS intec’s induction welding system. This certificate approves use of isoweld for attachment of thermoplastic single-ply membranes (PVC and TPO) within roofing systems offered by several single-ply membrane original equipment manufacturers (OEMS).