RCMA Releases 2015 Annual Report

The Roof Coatings Manufacturers Association (RCMA) recently released its 2015 Annual Report. The report highlights the association’s five strategic objectives and accomplishments in 2015, which establishes RCMA as the leading advocate and resource in the roof coatings industry. The report was released to the public and made available on the RCMA website.

In the report, RCMA highlighted its successful merger with the Reflective Roof Coatings Institute (RRCI). The merger resulted in the launch of the RCMA Speakers Bureau program, redesign of the RCMA website, and revision of the “Reflective Roof Coatings and LEED” white paper. Additionally, RCMA met its objective to enhance its communication program by distributing seven press releases and placing 13 articles in industry publications during 2015.

By expanding its government relations program, RCMA proactively engaged in state and federal public policy issues including, but not limited to, the National Ozone Standard, volatile organic compounds (VOCs), hazardous communications, and energy-efficiency tax credits.

As the technical and educational resource, RCMA spent considerable time participating in building code and standard development activities. Through the efforts of the Codes and Standards and Sustainability Task Forces, RCMA continues to be a representative of the roofing and building industry.

Additionally, RCMA set a strategic objective aiming to achieve 50 percent operating reserve for the association within five years. Because of tremendous growth, RCMA is well positioned to achieve this objective within the allotted timeframe.

RCMA and Members of Congress Address Issues of the Roof Coatings Industry

Members of the Roof Coatings Manufacturers Association (RCMA) met with its members of Congress on Capitol Hill as part of the Association’s Summer Meeting and Legislative Day.

More than 30 RCMA members participated in the Legislative Day, which entailed paying visits to members of Congress and key congressional staffers from their states and districts. RCMA scheduled meetings with more than 80 congressional offices, offering opportunities for manufacturers and suppliers to the industry to communicate to lawmakers the issues of importance to the roof coatings industry.

“The meetings on Capitol Hill gave RCMA members the chance to highlight the issues that are important to our industry,” says John Ferraro, RCMA’s executive director. “It was clear many of the senators, representatives and legislative staffers we met with were receptive to these industry issues, and therefore RCMA will be continuing the dialogue with these congressional offices.”

In particular, RMCA members discussed three main issues of interest to the roof coatings industry: opposing the Environmental Protection Agency (EPA) from further lowering the National Ozone Standard, supporting the Clean Air, Strong Economies (CASE) Act, and advocating for a federal tax credit for reflective roof coatings.

The RCMA opposes the EPA’s proposal to lower the National Ozone Standard. Reductions to the standard have resulted in implementation of hundreds of regulations that created a tremendous regulatory burden. Consequently, the rule forced industries to spend billions of dollars to reformulate their products to achieve new volatile organic compound (VOC) content limits. Over the last few decades, 90 percent of VOC content has been eliminated from roof coatings, and further reduction of VOCs can have a wide variety of unintended consequences.

The RCMA supports the CASE Act (Senate Bill 751 and House Bill 1388). The bill would prohibit the U.S. EPA from lowering the National Ambient Air Quality Standard (NAAQS) until at least 85 percent of counties that are in nonattainment areas have attained the standard.

To incentivize building owners to make the investment to save energy and reduce roofing waste, the RCMA supports the creation of a federal tax credit for reflective roof coatings applied to low slope roof surfaces on multi-family residential, commercial and industrial buildings.

Roof Restoration Coating System Is an Alternative to Complete Roof Replacement

The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off.

The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off.

The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off. It provides adhesion to a variety of existing roof systems to form a monolithic, waterproofing membrane, protecting your roof system from further weathering, UV deterioration, moisture, wind and thermal shock—elements that reduce the life of a roof system. The results is a seamless, reflective, economical solution providing many benefits, including a CRRC and ENERGY STAR system that exceeds all Title 24 requirements.

Benefits:

  • Saves energy
  • Environmentally friendly
  • No tear-off
  • Reduces heat transfer
  • Keeps building cool
  • Withstands ponding
  • Low-cost maintenance
  • Quick and easy installation
  • Super adhesion to a variety of surfaces
  • VOC compliant
  • Sprayer or roller applied
  • Chemical and fire resistant
  • Excellent wind resistance

Metacrylics 3-Second Acrylic is in the final stage of development and will be available this summer. It can be sprayed to any mil thickness in a single pass because of its instant set time.

The 3-Second Acrylic is a two-part, water-based, non-flammable, non-solvent, low-VOC product that has excellent adhesion and very low perms.

TPO Membrane Features Enhanced Adhesive

GenFlex Roofing Systems has introduced an enhanced self-adhesive technology for its EZ TPO Peel & Stick membrane.

GenFlex Roofing Systems has introduced an enhanced self-adhesive technology for its EZ TPO Peel & Stick membrane.


GenFlex Roofing Systems has introduced an enhanced self-adhesive technology for its EZ TPO Peel & Stick membrane. The new adhesive formula offers twice the bonding strength and can be installed in temperatures as low as 20 F and as high as 120 F. The new adhesive also has no VOCs and is odor-free. Therefore, the membrane is safe for installers and building tenants, avoiding any delays or concerns when working in occupied buildings.

Install EPDM in Temperatures from 20 to 120 F

Firestone Building Products Co. LLC has launched its Secure Bond Technology, which ensures adhesion coverage across the entire roofing membrane.

Firestone Building Products Co. LLC has launched its Secure Bond Technology, which ensures adhesion coverage across the entire roofing membrane.


Firestone Building Products Co. LLC has launched its Secure Bond Technology, which ensures adhesion coverage across the entire roofing membrane. The company will offer Ultra Ply TPOSA and RubberGard EPDM SA with Secure Bond Technology. RubberGard EPDM SA and UltraPly TPO SA with Secure Bond Technology can be installed in temperatures between 20 and 120 F. The technology has no VOCs and does not emit odor during or after installation. It also is FM tested and approved, meets or exceeds all ASTM requirements and is covered by the Firestone Building Products Red Shield Warranty.