Roof Restoration Coating System Is an Alternative to Complete Roof Replacement

The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off.The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off.

The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off.

The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off.

The Metacrylics Roof Restoration System is an alternative to a complete roof replacement and tear-off. It provides adhesion to a variety of existing roof systems to form a monolithic, waterproofing membrane, protecting your roof system from further weathering, UV deterioration, moisture, wind and thermal shock—elements that reduce the life of a roof system. The results is a seamless, reflective, economical solution providing many benefits, including a CRRC and ENERGY STAR system that exceeds all Title 24 requirements.

Benefits:

  • Saves energy
  • Environmentally friendly
  • No tear-off
  • Reduces heat transfer
  • Keeps building cool
  • Withstands ponding
  • Low-cost maintenance
  • Quick and easy installation
  • Super adhesion to a variety of surfaces
  • VOC compliant
  • Sprayer or roller applied
  • Chemical and fire resistant
  • Excellent wind resistance

Metacrylics 3-Second Acrylic is in the final stage of development and will be available this summer. It can be sprayed to any mil thickness in a single pass because of its instant set time.

The 3-Second Acrylic is a two-part, water-based, non-flammable, non-solvent, low-VOC product that has excellent adhesion and very low perms.

3 Comments on "Roof Restoration Coating System Is an Alternative to Complete Roof Replacement"

  1. I’ve been wondering what the best method would be for my damaged roof. Most of my roof damage comes from moisture. From what you’ve said, it sounds like this restoration system might be exactly what I need. How long does it take to apply the coating system?

    • I am also curious about how long it takes to apply the coating?

    • The time frame of the application would depend on a few different parameters:
      – How much Square Footage is involved
      – How many people are applying the product
      – Is application being roller or spray applied
      – What coating system is being applied
      – How much roof top penetrations and equipment exist

      However, for a basic coating system you are most likely looking at 3-4 days. For a fully reinforced system you are looking more like 7-10 days. Here is the basic process of the installation.
      – Power Wash
      – Complete field repairs if necessary
      – Apply a primer coat
      – Seal & reinforce roof top penetrations with alternating layers of Metacrylics Gel and fabric
      – Apply 2 coats of UV top coat

      Generally, you have to wait 24-48 hours between applications of products, depending on local weather and temps, to allow the product to dry and cure.

Leave a Reply